| Kit Screw Size | Sheet Metal Screw Type | Length of Anchor | Drill Size | Kits per Case | List Price |
| 6-8* | Pan/Slot | 3/4 | 3/16 | 17 | X |
| 8-10* | Pan/Slot | 7/8 | 3/16 | 17 | X |
| 10-12* | Pan/Slot | 1 | 1/4 | 17 | X |
| 14-16** | Pan/Slot | 1-3/8 | 5/16 | 17 | X |
| 6-8* | Combination Phil/Pan | 3/4 | 3/16 | 17 | X |
| 8-10* | Combination Phil/Pan | 7/8 | 3/16 | 17 | X |
| 10-12* | Combination Phil/Pan | 1 | 1/4 | 17 | X |
| 14-16* | Combination Phil/Pan | 1-3/8 | 5/16 | 17 | X |
| 6-8* | HWH | 3/4 | 3/16 | 17 | X |
| 8-10* | HWH | 7/8 | 3/16 | 17 | X |
| 10-12* | HWH | 1 | 1/4 | 17 | X |
*Each kit contains:
100 Plastic Anchors
100 Sheet Metal Screws
1 Masonry Drill Bit
Private label available on orders of 25 kits or more only
** Each kit contains:
50 Plastic Anchors
50 Sheet Metal Screws
1 Masonry Drill Bit
Private label available on orders of 25 kits or more only.
Plastic Anchor Kits…
NOW WITH YOUR
OWN PRIVATE LABEL!
Mix & Match Quantities
- Label may read however requested (e.g., address. Phone number, retail price). Maximum 4 lines. (29 characters/line max.)
- Available in Slotted Pan and Hex washer and Combination Head Screws.
- Must order a minimum combination of 25 kits.
Packed as Noted.
PLASTIC ANCHOR KIT
100-10-12 X 1” PLASTIC ANCHORS
100-10 X 1-1/4 SHEET METAL SCREWS
1-1/4” MASONARY DRILL
HOW TO INSTALL
- DRILL ¼” HOLE APPROXIMATELY 1 ¼” DEEP WITH ENCHOLED DRILL
- PLACE ANCHOR IN DRILLED HOLE AS FAR AS IT WILL GO.
- INSERT SCREW THROUGH HOLE IN FIXTURE TO BE ANCHORED, THEN TURN SCREW TIGHT WITH ANCHOR.
BOLT’S HARDWARE 1243 NUT & WASHER ST. ANYTOWN, ANYWHERE 54321
A HARDWARE STORE AND MORE
