| Length Size | Price | Box/Case Quantity | Drill Size | A: Effective Anchor Length | Bolt Diameter/ Theads Per inch | Minimum Embedment | Maximum Thickness of Material To Be Fastened |
| FLAT HEAD | |||||||
| 1/4 x 2 | X | 100/1000 | 1/4 | 2 | 10-24(3/16) | 1 1/8 | 1 |
| 1/4 x 2 FT | X | 100/1000 | 1/4 | 2 | 10-24(3/16) | 1 1/8 | 1 |
| 1/4 x 3 | X | 100/600 | 1/4 | 3 | 10-24(3/16) | 1 1/8 | 1 7/8 |
| 1/4 x 4 | X | 100/600 | 1/4 | 4 | 10-24(3/16) | 1 1/8 | 1 7/8 |
| 5/16 x 2 1/2 | X | 100/1000 | 5/16 | 2 1/2 | 1/4-20 | 1 1/2 | 1 1/2 |
| 5/16 x 3 1/2 | X | 50/500 | 5/16 | 3 1/2 | 1/4-20 | 1 1/2 | 2 1/2 |
| 3/8 x 2 3/4 | X | 50/300 | 3/8 | 2 3/4 | 5/16-18 | 1 1/2 | 1 1/2 |
| 3/8 x 4 | X | 50/300 | 3/8 | 4 | 5/16-18 | 1 1/2 | 2 3/4 |
| 3/8 x 5 | X | 50/300 | 3/8 | 5 | 5/16-18 | 1 1/2 | 3 3/4 |
| 3/8 x 6 | X | 50/300 | 3/8 | 6 | 5/16-18 | 1 1/2 | 4 3/4 |
| ROUND HEAD | |||||||
| 1/4 x 1 1/4 | X | 100/1000 | 1/4 | 1 1/4 | 10-24(3/16) | 1 1/8 | 1/4 |
| 1/4 x 2 | X | 100/1000 | 1/4 | 2 | 10-24(3/16) | 1 1/8 | 1 |
| 1/4 x 2 3/4 | X | 100/1000 | 1/4 | 2 3/4 | 10-24(3/16) | 1 1/8 | 1 3/4 |
| 5/16 x 2 3/8 | X | 100/600 | 5/16 | 2 3/8 | 1/4-20 | 1 1/2 | 1 3/8 |
| 5/16 x 3 3/8 | X | 100/600 | 5/16 | 3 3/8 | 1/4-20 | 1 1/2 | 2 3/8 |
| 3/8 x 2 1/2 | X | 100/600 | 3/8 | 2 1/2 | 5/16-18 | 1 1/2 | 1 1/2 |
| 3/8 x 3 3/4 | X | 50/300 | 3/8 | 3 3/4 | 5/16-18 | 1 1/2 | 2 1/2 |
| ROD COUPLING | |||||||
| 3/8 x 7/8 | X | 50/300 | 3/8 | 1 7/8 | 5/16-18 | 1 1/2 | 2 |
| 1/2 x 2 1/4 | X | 25/125 | 1/2 | 2 1/4 | 3/8-16 | 1 3/4 | 3 1/2 |
Smaller Head Diameter
Description/Application:
The Sleeve anchor is the most versatile heavy-duty expansion anchor available. The sleeve expansion device allows this anchor to be used in cement, Block, thin wall or solid concrete, brick or stone. Ribbed sleeve design assures holding power of expansion sleeve. Hex nut styles provide a wide variety of industrial and commercial applications. Flat head variations are particularly useful for anchoring door and window frames. Comes complete with nuts an washers.
Installation:
- Drill hold to proper size to any depth exceeding minimum embedment. Outside diameter is necessarily larger than actual bolt diameter.
- Insert assembled anchor into hold, so that washer is flush with material to be fastened.
- Expand anchor by tightening nut or head 2 or 3 turns.
