| 1/4 x 1 3/4 | X | 100/1000 | 1/4 | 1 3/4 | 3/8 | 3/4 | 1 1/8 | 1,855 | 1,647 |
| 1/4 x 2 1/4 | X | 100/1000 | 1/4 | 2 1/4 | 7/8 | 3/4 | 1 1/8 | 1,855 | 1,647 |
| 1/4 x 3 | X | 100/1000 | 1/4 | 3 | 1 5/8 | 3/4 | 1 1/8 | 1,855 | 1,647 |
| 1/4 x 3 1/4 | X | 100/1000 | 1/4 | 3 1/4 | 1 7/8 | 3/4 | 1 1/8 | 1,855 | 1,647 |
| 3/8 x 2 1/4 | X | 100/600 | 3/8 | 2 1/4 | 3/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 3/8 x2 3/4 | X | 100/600 | 3/8 | 2 3/4 | 7/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 3/8 x 3 | X | 100/600 | 3/8 | 3 | 1 1/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 3/8 x 3 1/2 | X | 100/600 | 3/8 | 3 1/2 | 1 7/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 3/8 x 5 | X | 50/300 | 3/8 | 5 | 3 1/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 3/8 x 6 1/2 | X | 50/300 | 3/8 | 6 1/2 | 4 3/8 | 1 1/8 | 1 1/2 | 3,075 | 3,294 |
| 1/2 x 2 3/4 | X | 50/250 | 1/2 | 2 3/4 | 3/8 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 3 3/4 | X | 50/250 | 1/2 | 3 3/4 | 1 1/8 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 4 1/4 | X | 25/150 | 1/2 | 4 1/4 | 1 1/2 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 5 1/2 | X | 25/150 | 1/2 | 5 1/2 | 2 3/4 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 7 | X | 25/125 | 1/2 | 7 | 4 1/4 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 8 1/2 | X | 25/100 | 1/2 | 8 1/2 | 5 3/4 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 10 | X | 25/100 | 1/2 | 10 | 7 1/4 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 1/2 x 12 | X | 25/100 | 1/2 | 12 | 8 3/4 | 2 1/4 | 2 1/4 | 4,982 | 6,543 |
| 5/8 x 3 1/2 | X | 25/125 | 5/8 | 3 1/2 | 3/8 | 2 3/4 | 2 3/4 | 7,007 | 8,084 |
| 5/8 x 4 1/2 | X | 25/125 | 5/8 | 4 1/2 | 1 1/8 | 2 3/4 | 2 3/4 | 7,007 | 8,084 |
| 5/8 x5 | X | 25/125 | 5/8 | 5 | 1 5/8 | 2 3/4 | 2 3/4 | 7,007 | 8,084 |
| 5/8 x 6 | X | 25/100 | 5/8 | 6 | 2 5/8 | 2 3/4 | 2 3/4 | 7,007 | 8,084 |
Meets or exceeds U.S. government G.S.A. Specifications FF-S-325 Group 11, Type 4, Class 1.
*Ultimate load capacity in 4000 PSI concrete. Laboratory test reports available upon request. Safe working loads for static loading should not exceed 25% or ultimate loads.
Description/Application:
The Wedge Anchor is easy to use. Anchor bolt, carbide bit, and hole size are all the same. Heavy-duty and versatile, the Wedge Anchor is non-bottom bearing, so precise hold depth or clean-out is not always required. A one-piece expanding clip assures full expansion for rugged, dependable holding strength. Available in zinc-plated carbon steel, galvanized steel and stainless steel.
(Comes complete with washers and nuts.)
Note: Not recommended for use in lightweight masonry material such as block or brick.
See next page for installation instructions.
